Draw 90° Bent Plate

This tool draws an L-shaped (90-degree bent) plate profile based on user inputs.

Output

Generates the 2D geometry of the bent plate (dimensions are not automatically added).

Inputs

Requires defining points for direction and entering lengths and thicknesses for both the horizontal and vertical sections.

1. 1.Type 90p in the command line and press Enter.
2. 2.Click the Start Point (PT1).
3. 3.Click the Horizontal Direction (PT2).
4. 4.Click the Vertical Direction (PT3).
5. 5.Enter the Horizontal Length.
6. 6.Enter the Vertical Length.
7. 7.Enter the Horizontal Thickness.
8. 8.Enter the Vertical Thickness.