Draw Cover Plate (4 Slots)

This tool automatically draws a rectangular steel cover plate with four double-ended rounded bolt holes (slots) placed near the corners.

Parametric Design

Allows you to define the overall size, hole positions, and fillet radii for both the cover corners and the bolt holes in a single operation.

Input

Requires a base point (bottom-left), overall width and height, vertical and horizontal offsets for the holes, and fillet radii for the outer corners and the holes.

The complete steel cover with 4 bolt holes is drawn.

1. 1.Type stcv in the command line and press Enter.
2. 2.Click the Bottom-Left Point (PT1).
3. 3.Enter the Total Width.
4. 4.Enter the Total Height.
5. 5.Enter the Vertical Offset (distance from bottom edge to hole center).
6. 6.Enter the Horizontal Offset (distance from left edge to hole center).
7. 7.Enter the Outer Corner Radius (Fillet radius for the cover plate).
8. 8.Enter the Hole Fillet Radius (Radius for the rounded ends of the bolt holes).