Insert DC Ammeter

This tool automatically draws a DC current meter (ammeter) symbol at a specified location on a sequence drawing.

Standard Size

At an　insertion scale of 1, the symbol's circle has a diameter of 21mm.

Dynamic Adjustment

The symbol's scale can be adjusted during the command using the fac option.

(Optional) Type fac and press Enter to change the scale if needed.

The DC current meter symbol is drawn centered on the　selected point.

1. 1.Type dcur in the command line and press Enter.
2. 2.Enter the　Insertion Scale (required only on first run; default 1 = 21mm circle).
3. 3.Click the Center Point on the line where you want the meter drawn.